| |
Download
|
|
|
|
|
| PSL
ledge die clamp |
85-250 kN,
3 models
|
|
- lateral fixed clamp
- two or more units can be combined
- can be used on bolster with dies
of standardized size
- can be used on ram, if stoke is
electronically controlled
- hydraulic power
|
|
|
|
|
| TBHS
banana swing clamp |
20-630 kN,
7models
|
|
- retractable clamping rod, clamping
jaw escapes from die
- horizontal clamping surfaces
- clamping force applies perpendicularly
to clamping rod (no radial load)
- includes mechanical safety lock,
so the die cannot drop from ram in case of pressure
fail
- escaping rod prevents any jamming,
even in the toughest applications, such as forging
- hydraulic power
|
|
|
|
|
| LSGH
T-slot clamp |
25-140 kN,
4 models
|
|
- placed into two matching
DIN-650 T-slots on bolster and
die
- includes a roller-bar, on which
the die can be moved when the clamp is in released
state
- two or more units can be combined
- no-footprint clamping
- used for moving and clamping of
dies covering entire bolster
- hydraulic power
|
|
|
|
|
| TB90
90° tilting die clamp |
60-100 kN,
2 models
|
|
- double-action clamp with no footprint
- when released, the clamp arm is
tilted by 90°, so the ram or bolster surface
is clear
- requires 30 or 40 mm aperture width
on die
- hydraulic power
|
|
|
|
|
| LSHP
T-slot clamp with GP45 rollers |
60-100 kN,
2 models
|
|
- ledge clamp for very heavy dies
(up to 50 tons) that cover entire bolster
- GP45 rollers fitted to the die
plate allow movement when clamp is in released state
- requires bolster and die plates
to be modified for appropriate slots and holes (call
us for further specifications)
- hydraulic power
|
|
|
|
|
| LSHP 28 T-slot
clamp |
60-100 kN,
2 models
|
|
- ledge clamp (idem 70-03) for a
DIN
650 T-slot
|
|
|
|
|
| ROTO-ESCAM
swing sink die clamp |
50-200 kN,
4 models
|
|
- rotating clamp using a
DIN 650 T-slot
- rotating and clamping functions
are independent of each other,
so accidental jams cannot cause damage
- positioning control via PLC module
- clamping height as required
- hydraulic power
|
|
|
|
|
| TBH
wedge clamp |
25-100 kN,
3 models
|
|
- retractable clamping rod
- clamping surface slanted by 20°
- requires that clamping surface
on die plate also slants by 20°
- not suitable for applications in
which the die is subject to shock
(die might jam when clamps are released)
- hydraulic power
|
|
|
|
|
| TBHI wedge
clamp |
15-100 kN,
4 models
|
|
- retractable clamping rod
- clamping jaw in horizontal, clamp
body tilted by 6°
- irreversible clamping mechanism
- not suitable for applications in
which the die is subject to shock
(die might jam when clamps are opened)
- hydraulic power
|
|
